How to Fix the Error of the HP Printer Power Light Blinking?

Best possible solution for HP Printer Power Light Blinking

How to Fix the Error of the HP Printer Power Light Blinking?
If the power light on your HP printer is blinking, there can be a problem with the printer or a connectivity issue. You might attempt the following steps to solve the problem:
  1. Make sure the power wire is firmly inserted into both the printer and the socket before proceeding. The power light could flicker if the cord is broken or the outlet isn't working properly.
  2. Turn off the printer and unhook it from the outlet to restart it. After waiting a while, plug it back in and turn it back on. This can frequently fix simple printer problems.
  3. For updates, check: Ensure that the firmware and drivers for your printer are up to date. On the HP website or through the control panel of the printer, you can look for updates.
  4. Make sure the printer is within your router's range and that it is linked to the correct Wi-Fi network to check for connectivity issues if you are utilising a wireless connection. Verify that the Ethernet cable is firmly attached to the printer and the router if you are using a wired connection.
  5. Examine the power light for paper jams: If the power light is blinking in a certain pattern, there might be a paper jam. Inspect the printer for any paper that may be trapped, and if required, remove it.
  6. Toner or ink levels should be checked because low levels could result in the power light blinking. As required, swap out the toner or ink cartridge.
  7. Reset the printer: If none of the aforementioned measures are successful, you might need to do so. Turn off the printer and unhook it from the outlet to accomplish this. 30 seconds of sustained pressure on the power button, followed by releasing and re-plugging the printer. Check to check if the power light stops blinking after turning on the printer.

Causes of the Blinking HP Printer Light Problem

It is usually a good idea to understand the issue and its cause before starting the troubleshooting steps. There are several things that could be the root of this issue. Those are:

  1. Your HP printer's power light will blink when it is printing stuff.
  2. A light that blinks swiftly indicates when the cartridge door is open.
  3. Power lights that blink frequently may indicate a printer problem.
  4. If there is a paper jam or the paper tray is empty, the resume light will flash.
  5. When a printer component fails or there are any internal problems, the printer light will begin to blink.
  6. The device needs to be rebooted if the power and resume lights are blinking simultaneously.
  7. The faulty connection or connection loss causes the device power and the error light to start to flicker for five seconds.

Procedures for Solving the HP Printer Light Blinking Issue

There is nothing to be concerned about if this problem is with your printer. To resolve this issue, you only need to follow the steps stated below in the precise order. There are two simple approaches to fixing this issue. Here are the procedures to do in order to fix the HP printer light blinking problem:

Method 1: All of the lights on your device's control panel will start to blink in this situation. Blinking will start on the power lights, ink cartridge lights, attention lights, colour cartridge lights, and other lights. The operation of the printer may be compromised if all of the aforementioned lights start to blink. This situation can be fixed by restarting the HP printer.

See the information below for details on how to restart an HP printer:

Step 1: Before continuing, make sure the printer and the power source are both without the power wire.

Step 2: Delay for one to five minutes.

Step 3: Reattach the printer's power cord to the outlet and the back of the machine

Step 4: After you're done, turn on the HP Pinter to see if the light is still blinking.

The issue is fully resolved if the light stops blinking and the printer is running normally. If the issue still exists, follow the second method.

Method 2: If the first strategy didn't work, give this one a shot as well. This strategy is simple and often successful. Take the following steps to fix the HP printer's light flickering issue:

Step 1: Start by carefully removing the ink cartridges from the printer panel.

Step 2: Next, remove the power cord from the HP Printer's socket and from the side of the machine.

Step 3: Connect the USB cable and do the same (In case it is connected).

Step 4: Wait a moment after completing (Say 15 seconds).

Step 5: Press the power button to turn on your HP printer.

Step 6: Reattach all disconnected wires, including the power and USB cords (if using).

Step 7: Switch on the printer and watch as it starts to print.

Step 8: Check to see if the lights are still blinking. If the blinking lights stop, the issue has been fixed.

If none of these fixes the problem, there can be a more serious issue with the printer. To get more help in this situation, it might be required to get in touch with HP support.

I hope you found this article helpful; if you need assistance with a any tech support issue, call our customer service line at (+1) 855-748-0653 or visit our reputable website at

Call Now : (+1) 855-748-0653

Live Chat or Call now: Click Here

Download App for Android: Click Here

Download App for iOS: Click Here


hp printer support

Remote desktop support

Laptop Support Phone Number

Printer setup