How to Fix the Linksys Velop Blinking Red Light Issue?

Linksys Velop Blinking Red Light Issue

The Linksys Velop Wi-Fi router is a versatile, powerful device that offers a variety of features and functionalities. However, like any other electronic device, it can occasionally suffer from technical issues. One of the most common issues users encounter is a blinking red light on the router. This can cause you to lose internet connection or experience other technical difficulties.

Step to Fix Linksys Velop Blinking Red Light Issue

1. Confirm Which Node is Blinking Red: To determine whether you are having an issue with your Linksys Velop system, it is important to confirm which node is blinking red. If the node connected to the modem is blinking red, you may have an issue with the internet connection. If the node that is not connected to the modem is blinking red, the issue could be with the mesh connection.
2. Reset Linksys Velop: If the first node connected to the modem is blinking red, you can try resetting your Linksys Velop system. To do this, press and hold the reset button for 10 seconds. This will reset the system and should enable it to connect to the modem.
3. Check Cables and Connections: It is important to ensure that all of the cables and connections are firmly in place. Check the cables between the modem and the first node of the Linksys Velop system. Check the connections between the other nodes in the system.
4. Reconfigure Linksys Velop: If the step above is successful, it is likely that the issue was a result of an incorrect configuration. To fix this, you will need to reconfigure the Linksys Velop system. This can be done through the Linksys app.
5. Update Linksys Velop Firmware: Another potential cause for a blinking red light on a Linksys Velop node is that the firmware is out of date. To ensure that this is not the case, you should check the Linksys website for updates. If an update is available, you should install it immediately.
6. Contact Linksys Support: If you have followed the steps above and the Linksys Velop is still blinking, it is recommended that you contact Supportly App for assistance.

How to Resolve the Linksys Velop Blinking Red Light Problem?

Troubleshooting the Linksys Velop blinking red light issue is not difficult and you can fix it on your own. In this article, we will take a look at the troubleshooting steps you need to take in order to get your router’s light back to its normal state.

The first step to take when troubleshooting the Linksys Velop blinking red light issue is to reset the router. The best way to do this is by pressing and holding the Reset button until the light changes from red to green. This can take up to 20 seconds but will not affect your saved settings.

Once the light changes to green, it is important that you power cycle the router as this will ensure that the router restarts properly. To do this, simply unplug the power cable from the back of the router and wait for at least 10 seconds before plugging it back in.

The next step is to check the LED status of the router at different points around your home. Depending on the strength of your signal, the LED status may differ. If the LED status changes when you move the router around in your house then this is a good indication that the blinking red light issue may be caused by your router’s location.

In this case, simply move the router to a location that has better signal strength and check the LED status again. If this does not fix the blinking red light issue, then you will need to move on to other troubleshooting steps.

The next step is to make sure that your router is up to date. To check your router’s firmware version, open any browser on your computer and type the “IP Address” of your router into the address bar. This address can usually be found on the back of the router and looks something like “192.168.1.1”.

Once you are in the login page, enter your credentials. From here, you can access the advanced settings menu where you can check for software updates. If an update is available, then you should proceed with the update immediately.

The last step is to reset the wireless network settings on your router. To do this, log into the router’s web interface and go to the “Wireless” option. Select the “Reset” option and wait for the router to reset. Once the reset has been completed, check to see if the blinking red light issue has been resolved.

If none of the above troubleshooting steps work, then you should contact Linksys support for additional help. They should be able to diagnose and resolve the issue for you.

Hopefully, this article has helped you diagnose and fix the Linksys Velop blinking red light issue. It is important to remember that it is normal for the light to blink occasionally but if it is constant, then troubleshooting as outlined in this article should help you resolve the issue.