How Do I Resolve TP-Link Router Error Code 80002?

Resolve TP-Link Router Error Code 80002

TP-Link routers are one of the most reliable and widely used routers in the world. They are known for their robustness, reliability and ease of use. Unfortunately, even the best routers can encounter problems from time to time, and one of the most common issues encountered is an error code 80002. This error code can occur for a variety of reasons, and in this article, we will discuss how to resolve this error code. 

Step to Resolve TP-Link Router Error Code 80002

1. Check the connection between the router and the modem: Make sure that the modem is connected to the router's WAN port, and the Ethernet cable is firmly inserted into the port.
2. Reset the modem and router: Unplug the power of both the modem and the router and wait for about 1 minute before plugging them back in.
3. Reset the router: Hold down the reset button on the router for about 10 seconds and then release it. Wait for the router to reset itself and then try connecting again.
4. Update the firmware: The router may have an outdated firmware which might be causing the problem. Download the latest firmware from the manufacturer's website and use it to update the router's firmware.
5. Reset the settings: If all else fails, you can reset the router to factory settings. This will erase all the customized settings and will also reset any security settings.
6. Firstly, it is important to understand what error code 80002 is. This error code is associated with a DNS query failure. This means that the router is unable to process a domain name request from a computer or device on the network. This can be caused by a variety of issues, including incorrect settings on the router, problems with the DNS server or a faulty network adapter on the device.

How to Resolve TP-Link Router Error Code 80002?

The first step in resolving this error is to check the settings on the router. Make sure that the DNS server address is set correctly, and also check that the router is set to use the correct adapter. If the settings are correct, then try resetting the router by powering it off and then on again. This will reset any settings that may have been changed.

If the router is still not functioning correctly, then it may be necessary to manually configure the DNS server address. This can be done through the router’s web-based setup page. To access this page, simply enter the router’s IP address into a web browser. Once you have accessed this page, look for the section labelled ‘DNS Server’ and enter the address of the DNS server you wish to use.

If this still does not resolve the error code, then it may be necessary to check the network adapter on the device. This can be done by checking the Device Manager for any problems or errors. If an error is found, then it may be necessary to reinstall the adapter drivers. To do this, simply download the latest drivers from the manufacturer’s website and install them on the computer.

Finally, if the error code still persists, then it may be necessary to contact your Internet Service Provider (ISP). Your ISP may be able to help you diagnose the problem and provide a solution. They may also be able to provide you with a new router if the one you have is not functioning correctly.

In conclusion, error code 80002 can be a frustrating problem to encounter, but it is one that can be resolved. The first step is to check the router settings and make sure that the correct adapter is selected and that the DNS server address is correct. If this does not resolve the issue, then try resetting the router or manually configuring the DNS server address. If these steps do not work, then it may be necessary to check the network adapter on the computer or contact your Supportly App for assistance.